Axess Ready CM-1115-RT-AR Guía de instalación descargar pdf (Pagina 20)

CM-1115(20)-RT-AR User Manual

Page 19

VII. Command Line Interface (CLI) Protocol

(continued)

Network Commands

Command

Description

Admin

Fact Def

get network Returns all network settings currently in use. Example:

Mode: DHCP

IP Address: 10.1.2.69

Subnet: 255.255.255.0

Gateway: 10.1.2.1

HTTP Port: 80

Telnet Port: 23

DxP Port: 9100

Timeout: 20

Yes

set ipmode < static | dhcp > Sets the IP address mode. Static mode locks the IP address as

set; DHCP mode allows a DHCP server to assign the address.

Yes Static

set ipaddress < dotted decimal > Sets the IP address. Yes 192.168.1.254

set subnet < dotted decimal > Sets the Subnet Mask. Yes 255.255.25

5.0

set gateway < dotted decimal > Sets the Gateway address. Yes 192.168.1.1

set http port < 0-65535 > Sets the port that the internal Web server listens for incoming

connections on. When set to 0 the web server is disabled. May

not be disabled when Telnet and DxP are both disabled.

Yes 80

set telnet port < 0-65535 > Sets the port that the internal Telnet server listens for incoming

connections on. When set to 0 the Telnet server is disabled. May

not be disabled when Web and DxP are both disabled.

Yes 23

set dxp port < 0-65535 > Sets the port that the internal DxP service listens for incoming

connections on. When set to 0 the DxP service is disabled. May

not be disabled when Web and Telnet are both disabled.

Yes 9100

set timeout < 0-999 > Sets the automatic network timeout in minutes. Yes 2

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 30 31

Sin comentarios

Axess Ready CM-1115-RT-AR Guía de instalación Pagina 20